Hadoop Single Node Setup on Ubuntu

In this post I will describe how to setup and configure a single-node Hadoop installation so that you can perform simple operations using Hadoop MapReduce and the Hadoop Distributed File System (HDFS).


Prerequisites

1. Java 1.6.x, must be installed. (Don't worry my previous post will help you doing this)
2. ssh must be installed. (I will show you in this post)

SSH installation can be done by running the following command

$  sudo apt-get install openssh-server 

Installing Software

Actual hadoop Installation start from here:


Step 1: Adding a dedicated Hadoop user

Login as a Root user to perform this steps

Running the following command

$  sudo addgroup hadoop
 This command creates a new group by name hadoop.

$ sudo adduser --ingroup hadoop hadoopuser 
 This command creates a new user in that group.

Step 2: Configuring SSH

Hadoop requires access to localhost (in case single node cluster) or communicates with remote nodes (in case multi-node cluster). After this step, you will need to generate SSH key for hduser (and the users you need to administer Hadoop if any) by running the following commands.

Before running this commands you should switch to hadoopuser

$ su hadoopuser

$ ssh-keygen -t rsa -P ""

just start pressing enter.

 Just to verify that all process went correctly run the below command

$ ssh localhost

 

Step 3: Disable IPv6

You will need to disable IP version 6 because Ubuntu is using 0.0.0.0 IP for different Hadoop configurations.

You will need to run the following commands using a root account:

$ su root

$ sudo gedit /etc/sysctl.conf 

Add following commands at the end of the file.

#disable ipv6

net.ipv6.conf.all.disable_ipv6 = 1

net.ipv6.conf.default.disable_ipv6 = 1

net.ipv6.conf.lo.disable_ipv6 = 1

 To confirm whether the Ipv6 is disabled you can run the following commands

$ sudo sysctl -p

 $ cat /proc/sys/net/ipv6/conf/all/disable_ipv6

After running the above command which will give output as 1.
Which confirms that IPV6 is disabled.

Step 4: Setting up Hadoop

     1. Login as hadoopuser and Download Hadoop from any of mirrors here.

NOTE:

I personally recommend to download a stable version.Here I have downloaded a

stable version hadoop-1.1.2.tar.gz from here.

     2. The downloaded hadoop-1.1.2.tar.gz will be available in /Downloads

Run the following commands to unzip the tar file.

$  cd Downloads

$ sudo tar xzf hadoop-1.1.2.tar.gz 

The unzipped folder by name hadoop-1.1.2 will be available in Downloads. Just move this folder to a new folder hadoop.

$ sudo mv hadoop-1.1.2/ /home/hadoopuser/hadoop

Then you can check in home/hadoop will have all the internal files.This are the files that will be edited in the next steps.
 

Errors that you may get in this step are

1.Permission denied error saying that user not in suders file which will be reported

Please note if you want to grant access for another hadoop admin user then

Run the following commands

$ sudo chown -R hadoopuser2:hadoop hadoop

solutions:

1.Performing all this steps as a root user.

NOTE:

2.Adding hadoopuser to suder's file.

(Which is not recommended in realtime but solves most of your up coming Error)

By running Command(login as root)

$ sudo aduser hadoopuser sudo

By running above commands your giving all the permissions to hadoopuser which is not recommended in realtime.

  

Update $HOME/.bashrc

you need to manually edit the .bashrc of hadoopuser with the following code.

Run this commands as root user

$ sudo gedit /home/hadoopuser/.bashrc

Add the following code at the end of File.

# Set Hadoop-related environment variables

export HADOOP_HOME=/home/hadoopuser/hadoop

# Set JAVA_HOME (we will also configure JAVA_HOME directly for Hadoop later on)

export JAVA_HOME=/usr/lib/jvm/java-1.6.0-openjdk-amd64

# Some convenient aliases and functions for running Hadoop-related commands

unalias fs &> /dev/null

alias fs="hadoop fs"

unalias hls &> /dev/null

alias hls="fs -ls"

# If you have LZO compression enabled in your Hadoop cluster and

# compress job outputs with LZOP (not covered in this tutorial):

# Conveniently inspect an LZOP compressed file from the command

# line; run via:

#

# $ lzohead /hdfs/path/to/lzop/compressed/file.lzo

#

# Requires installed 'lzop' command.

#

lzohead () {

    hadoop fs -cat $1 | lzop -dc | head -1000 | less

}

# Add Hadoop bin/ directory to PATH

export PATH=$PATH:$HADOOP_HOME/bin

   

   

The most Important part in the above text is to give correct

JAVA_HOME path

You can find java path going into /usr/lib/jvm

$ cd /usr/lib/jvm

If you followed my process of java installation running above 
 command will look like below screen shot.

 
Give the directory name such that it contains bin/java folders inside it.

According to my installation the JAVA_HOME path will look like below

JAVA_HOME /usr/lib/jvm/java-1.6.0-openjdk-amd64

Hadoop Configuration:

    To configure hadoop in your machine the following three files must be edited that is available in hadoop/conf.

1. hadoop-env.sh
2. core-site.xml
3. mapred-site.xml
4. hdfs-site.xml 

hadoop-env.sh:

  

 Just you need to edit the JAVA_HOME path by removing "#" symbol.

make sure you give correct Java home path.

core-site.xml

First, we need to create a tmp directory for Hadoop framework which is used by hadoop to store some of its files. If you don't create hadoop will create on its own. This directory is very important while creating a multi node cluster. Create tmp directory in home/hadoopuser.

$  mkdir home/hadoopuser/tmp
$  sudo chown hadoopuser:hadoop /home/hadoopuser/tmp
$ sudo chmod 755 /home/hadoopuser/tmp

We are setting to give permission so that other hadoopuser can access this directory. (Very Important in multinode cluster)

$ sudo chown hadoopuser2:hadoop /home/hadoopuser/tmp

Now edit core-site.xml my running the following comands

$ sudo gedit /home/hadoopuser/hadoop/conf/coresite.xml

 Copy the below lines of code between <configuration>.....</configuration>

<!-- In: conf/core-site.xml -->

<property>

  <name>hadoop.tmp.dir</name>

  <value>/home/hduser/tmp</value>

  <description>A base for other temporary directories.</description>

</property>

<property>

  <name>fs.default.name</name>

  <value>hdfs://localhost:51001</value>

  <description>The name of the default file system.  A URI whose

  scheme and authority determine the FileSystem implementation.  The

  uri's scheme determines the config property (fs.SCHEME.impl) naming

  the FileSystem implementation class.  The uri's authority is used to

  determine the host, port, etc. for a filesystem.</description>

</property>

 

mapred-site.xml

$sudo gedit home/hadoopuser/hadoop/conf/mapred-site.xml

Add following code in between configuration tags

<!-- In: conf/mapred-site.xml -->

<property>

  <name>mapred.job.tracker</name>

  <value>localhost:51002</value>

  <description>The host and port that the MapReduce job tracker runs

  at.  If "local", then jobs are run in-process as a single map

  and reduce task.

  </description>

</property>

hdfs-site.xml

$ sudo gedit home/hadoopuser/hadoop/conf/hdfs-site.xml

Add the following code in between configuration tags.

<!-- In: conf/hdfs-site.xml -->

<property>

  <name>dfs.replication</name>

  <value>1</value>

  <description>Default block replication.

  The actual number of replications can be specified when the file is created.

  The default is used if replication is not specified in create time.

  </description>

</property>

Thus we have made all the required changes that needed to set a single node cluster.

Formating Namenode:

  In order to format namenode go into bin directory by following command

$ cd home/hadoopuser/hadoop/bin
 $ ./hadoop namenode -format

which will format the namenode and gives the result as follows:

 Now start all the services by running following command

$ cd home/hadoopuser/hadoop/bin
$ ./start-all.sh

This command starts all the services like Namenode,Secondary namenode,datanode,jobtracker,tasktracker on single machine.

To see whether all the process has started run the command

$ jps

This shows that we have successfully configured a single node cluster.

Next????

In my Next post we will run a simple map reduce job using

1. Command prompt.
2. Setting and running in eclipse.



 

 

 

Installation of JAVA sun jdk 1.6 in Ubuntu box

Installing JAVA in Ubuntu:

Step 1:
Before installing please check your Ubuntu version
To check your version follow this steps
1.On the right corner of you desktop you find the symbol
2.Click on symbol----->About this computer

You could see the below screenshot:

  
 I am using the version Ubuntu 12.10(64 bit)

Step 1:

In order to run the Java program we need Jre(Java Runtime Environment) to be
installed in our system.

To check whether you system is installed with jre run the following command

$ java -version

If jre is not installed then it may show the similar screenshot.

Install jre by running the following command as shown in the Try:command from the above screenshot.

$ sudo apt-get install openjdk-6-jre-headless

This will automatically install jre after couple of steps

It will ask for to continue type : y

After completion run the following command to know the jre is installed sucessfully.

$ java -version

 This completes the Jre Installation.Lets proceed to next step

Step 2:

check whether your system is installed with java by running the following command:
$  javac

You could see the below screenshot If JAVA is not installed

Then try the following command as shown in above screen
Try: follow that thing by selecting the package.

Run this command:

$ sudo apt-get install openjdk-6-jdk

This command will install openjdk-6-jdk automatically.

After Installation You could see the below screen shot by running the command

$ javac

This completes the installation of Java.

For the Conformation you can try the following commands

$ echo JAVA_HOME

This command shows the Java home path.